logo About us Products Category Careers Contact us

123

Rigs & Accessories -----
Onshore Drilling Rig
Onshore workover Rig
Rotary Table
Swivel
Travelling Block and Hook
Drilling Steel Rope
Top Drive
Rig motor
Drilling Hose
Air Winch
Rig Roller Chain

Mud pump & Fluid end parts
Triplex Single Acting Mud pump
Fluid end parts

Handling tools -----
Rotary Slips
Drill Collar Slips
Casing slips
Safety Clamp
BNC Type elevator
SSC Type Elevator
Slip type Elevator
Casing elevator spider
Sucker Rod elevator
Single Joint Elevator
Roller Kelly bushing
Master Casing Bushing
Casing Bushing
Manual tong
Power tong
Hydraulic cathead
Air Safety Spinning Wrench
Kelly Spinner

Solid control equipment ----
Solid Control Equipment

BOP and Accessories -----
BOP & ACCUMULATOR

Drilling Strings -----
Kelly
H-W Drill pipe
Drill Collar
Stabilizer
X-over Subs
drilling jar
Hole opener
Under reamer
Down Hole motor
Drill pipe

Fishing Tools -----
Safety Joint
Overshot
Spear
Reverse Circulating Junk Basket
Casing Scraper

Drilling Instruments -----

Flow control products -----
Gate valve
Butterfly valve
SPM Plug valve

Wellhead & X-mass -----
Wellhead & X-mass tree





 
   Oneshore Drilling Rig

ZJ30/1700JD Electrically Driven Rig

ZJ30/1700JD drilling rig is a new-type electric drive rig taking the AC asynchronous motor as the power source . It can be used to drill 3000m vertical wells or 2500m cluster directional wells especially in oilfields with the electricity network, it may also be used in oilfield without the electricity network provided a 700kW diesel generator set is equipped.

Principle and Features of Rig Structure:

The drilling rig is equipped with a 40m cantilever (A type) mast and a module mounted substructure of integral traction type that can be moved separable or integrally, The traveling-hook-elevator link system has two kinds of rope reeling structures: 4x5 and 5x6 , customers may choose either structure according to the well depth. The rope reeling is made clockwise.

It uses joint drive of drawworks and rotary table and independent drive of mud pumps, so that the main driving system has only two transported, units, thus making the assembly or disassembly convenient.

The AC asynchronous motor can drive the drawworks and the rotary table. The electric control system is simple in structure, reliable in operation and smooth in driving. The transmission with multi speed shifting can meet the requirements of drilling wells under various formation conditions. Because the drawworks is equipped with a hydraulic disc brake, the high braking torque and the uniform brake block wear are obtained and the remote control is realized, further reducing driller's labour intensity. Besides, the air-cooling electromagnetic eddy current brake is used as an auxiliary brake to absorb the trip-in energy of the drill stem and lessen the wear of the hydraulic disc brake. The drawworks is the open-type in structure, the chain compound case itself is fully closed in the driving mode.

ZJ30/1700DZ Drilling Rigs

ZJ30/1700DZ drilling rig is a new-type electric drive rig taking the DC motors with additional features to ZJ30/1700JD

The power of the DC motor inputs the frequency converting case through the elastic pin coupling and drives the drum shaft and the rotary drive shaft respectively after changing the speed and transferring separately the power. The rotary drive shaft drives the rotary table through WX-870 cardan shaft. The driving system is divided into two units: drawworks and rotary table. The drawworks is equipped with DC motor, transmission, drum shaft, rotary drive shaft, hydraulic disc brake and frame. The transported units of the driving system are less, these two units are connected by WX-870 cardan shaft. Therefore, The transportation and the disassembly are convenient and prompt.

DC motor is taken as the power source to enable the rig to realize the stepless variable drive and the flexible driving, prolonging the service life of driving components.

Rig Parameters

Nominal Drilling Depth by 5" DP 2500 meters Drawworks Speed 4 +1
Nominal Drilling Depth by 4 1/2 DP 3000 meters Rotary Table 17 1/2 Opening
Max. Hook Load 170 Ton Rotary Table Speed 4 + 1
Travelling System 5 x 6 Effective Mast Height 40 meters
Drilling Line 29 mm Monkey Board Height 24.5, 25.5 and 26.5 meters
Max. Fast Line pull 20 ton Monkey Board Capacity (5"DP) 2500 meters

J40/2250L Rig

ZJ40/2250L Rig is designed by introduce Romainia made F-200, F-320 and F-500 Rig with the following components and spec.

Nominal Drilling depth by 4 1/2 DP 4000 meters Drawworks HP 735 kw
Total Power 930 KW* 3 Drawworks Speed 4 +2
Max. Hook Load 225 MT Rotary Table 20 1/2
Travelling system 5 x 6 Rotary Table Speed 4+2
Drilling line Size 1 1/4 Effective mast height 42 meters
ID of Washing pipe 75 mm Effective height of rig floor 4.8 meters

ZJ40/2250DB Drilling Rigs

ZJ40/2250DB drilling rig is an electrical-Driven rig. The drilling rig uses up-to-date AC frequency converting drive mode, namely, three 800kW AC generator sets, after generating electricity, merging into electricity network and finally converting frequency by means of frequency converter, control six 400 kW AC frequency converting motors, of which two motors, after compounded, drive a drawworks and four motors, after compounded in pair, drive two mud pumps. Motors are all steepless variable drive to meet a complicated drilling situation..

Nominal Drilling Depth by 4 1/2 inch DP 4000 meters Effective Mast Height 44 meters
Max. Hook Load 225 MT Effective Height of rig floor 7.5 meters
Drawworks HP 735 KW Total Power 800 kw *3
Travelling system 5 x 6 Diesel Engine CAT3512TA
Drilling line size 32 mm
Rotary Table 27 1/2

 

ZJ50/3150D E-Drive Drilling Rigs

 

 

ZJ50/3150DE drilling rig is equipped with a complete diesel generator set as the power source and uses the DC electric drive mode (by means of AC-SRC-DC) and the "one-to-two." control mode. These two modes feature advanced mechnical properties and convenient and reliable control.

The closed drawworks with internal variable drive is used to carry out the stepless variable drive through four gear shifts. The one-piece rotary drive case drives the rotary table through a cardan shaft. The drill floor is smooth and spacious.

These two 9m high substructures (the front substructure and the rear substructure ) of parallelogram type can be assembled on the ground. Besides, the open-front mast is used.

Nominal Drilling depth by 5"DP 4500 meters Clearance under Rotary Table and above ground 7.5 meters
Nominal Drilling Depth by 4 1/2"DP 5000 meters Effective mast height 45 meters
Max. Hook Load 315 MT Driven system AC-SCR-DC
Max. Input Horse Power of Drawworks 1500 HP Prime mover 800 kw *3
Drawworks Speed 4 stepless DC motor 6* 735KW
Travelling system 6 x 7  
Drilling Line 35 mm
Rotary Table 37 1/2

 

ZJ70/4500DS Desert Drilling Rigs

 

ZJ70/4500DS drilling rig is used to explore and develop 7000m ultra deep wells in the desert, The main features of the drilling rig are as follows:

1. AC-SCR-DC driving mode with advanced world level is used.
Drawworks , rotary table and mud pumps are driven by DC motors with stepless variable drive, making the drilling operation obtain the best performance parameters.

2. 9m high swing lift substructure is used. The drawworks is assembled on the low drill floor and then raised integrally with the substructure floor.

3. 45m high open front mast is assembled on the ground and raised integrally to the upright position.

4. The drilling rig is equipped with 2 F-1300 mud pumps and a complete solids control system that uses four purifying processes.

5. The high installed power is provided, the total power is 750x5=3750kW.

6. Generator set, mud pump set, solids control system and air processing device are installed inside the wind-proof and sand-proof houses. The drill floor and the racking platform are shielded with wind-proof and thermal insulation canvas.
Nominal Drilling Depth by 4 1/2 DP 7000 meters Travelling system 6 x 7
Max.Hook Load 450 MT Mud pump 2 * 1600 HP
Drawworks Rated HP 2000 HP Mast height 45 meters
Drawwork Speed 2 x 2 Rig floor height 9 meters
Drilling line 35 mm  
Rotary Table 37 1/2

 

ZJ70/4500D Drilling Rigs

ZJ70/4500D drilling rig is equipped with a diesel generator set as the power source and uses the direct current electric dirve mode ( by means of AC-SRC-DC) and the "one-to-two" control mode. These two modes feature advanced mechnical properties, convenient and reliable control.

The self lift (slingshot) type substructure is used. The mast and all equipment on the drill floor are assembled in a low position and then raised integrally.

The closed drawworks with stepless variable drive through four gear shifts and the turnover type sinking rotary drive case are used, all connections are made by cardan shafts. The drill floor is smooth and spacious.



Nominal Drilling depth by 4 1/2 inch DP 7000 meters Mast Height 45 meters
Nominal Drilling depth by 5 inch DP 6000 meters Rig Floor height 9 meters
Max. Hook Load 450 MT Prime Mover 4 * 800 KW
Drawworks input Horse Power 2000 HP DC motor 6 * 735 KW
Drawworks speed 4 stepless Rotary Table 37 1/2 inch
Travelling system 6 x 7
Rotary Table speed 2 stepless

 

TRUCK-MOUNTED DRILLING RIG

 

Truck-mounted drilling rig is a kind of self-propelled drilling rig. Self-propelled chassis, II type telescoping mast. with good country cross, easy moving. The power is from the diesel engine on chassis.

Chassis for truck-mounted rig is driven by power through transfer ase from diesel engine. Heavy Duty, wide base axles, low cross-section, high tensile chassis beam, hydraulic steering, dual pipelines braking.

The mast is designed as per API-8C, Double section II type, hydraulic rasing and telescoping mast, dual safety protection,easy operation. FEM analysis system is applied in mast design under 7 conditions.

CAT or Detroit Diesel Engine provides reliable power for rig. Allison transmission provides with excellent performance. Throttle of Engine, gear shfit can be air remote controlled. Gear compound box with compact structure, reliable performance.

Both single drum and Double drum Drawworks are available.Lebus groove to assure wirelines aligning in order and long life. Air thrust disc type clutch is used. Band type brakes for main drum braking, brake rims with forced water circulating cooling. Hydro-brake or aircontrolled disk brakes are optional for auxiliary brakes.

Centerally controlled electricity, air and hydraulic system provide easy operation and maintenance.

ЎЎ
 
Rigs
Drilling Depth (4 1/2 in DP)
Mast Height (meters)
Max. Load (MT)
Carrier
ZJ07
700
12.8
23
6 X 4
ZJ10
1000
32
90
10 X 8
ZJ15
1500
35
120
10 X 8
ZJ20
2000
35
135
12 X 8
ZJ30
3000
36
170
14 X 8

ZJ30/1700JD Electrically Driven Rig

ZJ30/1700JD drilling rig is a new-type electric drive rig taking the AC asynchronous motor as the power source . It can be used to drill 3000m vertical wells or 2500m cluster directional wells especially in oilfields with the electricity network, it may also be used in oilfield without the electricity network provided a 700kW diesel generator set is equipped.

Principle and Features of Rig Structure:

The drilling rig is equipped with a 40m cantilever (A type) mast and a module mounted substructure of integral traction type that can be moved separably or integrally, The traveling-hook-elevator link system has two kinds of rope reeving structures: 4x5 and 5x6 , customers may choose either structure according to the well depth. The rope reeving is made clockwise.

It uses joint drive of drawworks and rotary table and independent drive of mud pumps, so that the main driving system has only two transported, units, thus making the assembly or disassembly convenient.

The AC asynchronous motor can drive theЎЎdrawworks and the rotary table. The electric control system is simple in structure, reliable in operation and smooth in driving. The transmission with multi speed shifting can meet the requirements of drilling wells under various formation conditions. Because the drawworks is equipped with a hydraulic disc brake, the high braking torque and the uniform brake block wear are obtained and the remote control is realized, further reducing driller's labour intensity. Besides, the air-cooling electromagnetic eddy current brake is used as an auxiliary brake to absorb the trip-in energy of the drill stem and lessen the wear of the hydraulic disc brake. The drawworks is the open-type in structure, the chain compound case itself is fully closed in the driving mode.

ZJ30/1700DZ Drilling Rigs

ZJ30/1700DZ drilling rig is a new-type electric drive rig taking the DC motors with additional features to ZJ30/1700JD

The power of the DC motor inputs the frequency converting case through the elastic pin coupling and drives the drum shaft and the rotary drive shaft respectively after changing the speed and transferring separately the power. The rotary drive shaft drives the rotary table through WX-870 cardan shaft. The driving system is divided into two units: drawworks and rotary table. The drawworks is equipped with DC motor, transmission, drum shaft, rotary drive shaft, hydraulic disc brake and frame. The transported units of the driving system are less, these two units are connected by WX-870 cardan shaft. Therefore, The transportation and the disassembly are convenient and prompt.

DC motor is taken as the power source to enable the rig to realize the stepless variable drive and the flexible driving, prolonging the service life of driving components.

Rig Parameters

Nominal Drilling Depth by 5" DP 2500 meters Drawworks Speed 4 +1
Nominal Drilling Depth by 4 1/2 DP 3000 meters Rotary Table 17 1/2 Opening
Max. Hook Load 170 Ton Rotary Table Speed 4 + 1
Travelling System 5 x 6 Effective Mast Height 40 meters
Drilling Line 29 mm Monkey Board Height 24.5, 25.5 and 26.5 meters
Max. Fast Line pull 20 ton Monkey Board Capacity (5"DP) 2500 meters

J40/2250L Rig

ZJ40/2250L Rig is designed by introduce Romainia made F-200, F-320 and F-500 Rig with the following components and spec.

Nominal Drilling depth by 4 1/2 DP 4000 meters Drawworks HP 735 kw
Total Power 930 KW* 3 Drawworks Speed 4 +2
Max. Hook Load 225 MT Rotary Table 20 1/2
Travelling system 5 x 6 Rotary Table Speed 4+2
Drilling line Size 1 1/4 Effective mast height 42 meters
ID of Washing pipe 75 mm Effective height of rig floor 4.8 meters

ZJ40/2250DB Drilling Rigs

ZJ40/2250DB drilling rig is an electrical-Driven rig. The drilling rig uses up-to-date AC frequency converting drive mode, namely, three 800kW AC generator sets, after generating electricity, merging into electricity network and finally converting frequency by means of frequency converter, control six 400 kW AC frequency converting motors, of which two motors, after compounded, drive a drawworks and four motors, after compounded in pair, drive two mud pumps. Motors are all steepless variable drive to meet a complicated drilling situation..

Nominal Drilling Depth by 4 1/2 inch DP 4000 meters Effective Mast Height 44 meters
Max. Hook Load 225 MT Effective Height of rig floor 7.5 meters
Drawworks HP 735 KW Total Power 800 kw *3
Travelling system 5 x 6 Diesel Engine CAT3512TA
Drilling line size 32 mm
Rotary Table 27 1/2

 

ZJ50/3150D E-Drive Drilling Rigs

 

 

ZJ50/3150DE drilling rig is equipped with a complete diesel generator set as the power source and uses the DC electric drive mode (by means of AC-SRC-DC) and the "one-to-two." control mode. These two modes feature advanced mechnical properties and convenient and reliable control.

The closed drawworks with internal variable drive is used to carry out the stepless variable drive through four gear shifts. The one-piece rotary drive case drives the rotary table through a cardan shaft. The drill floor is smooth and spacious.

These two 9m high substructures (the front substructure and the rear substructure ) of parallelogram type can be assembled on the ground. Besides, the open-front mast is used.

Nominal Drilling depth by 5"DP 4500 meters Clearance under Rotary Table and above ground 7.5 meters
Nominal Drilling Depth by 4 1/2"DP 5000 meters Effective mast height 45 meters
Max. Hook Load 315 MT Driven system AC-SCR-DC
Max. Input Horse Power of Drawworks 1500 HP Prime mover 800 kw *3
Drawworks Speed 4 stepless DC motor 6* 735KW
Travelling system 6 x 7  
Drilling Line 35 mm
Rotary Table 37 1/2

 

ZJ70/4500DS Desert Drilling Rigs

 

ZJ70/4500DS drilling rig is used to explore and develop 7000m ultra deep wells in the desert, The main features of the drilling rig are as follows:

1. AC-SCR-DC driving mode with advanced world level is used.
Drawworks , rotary table and mud pumps are driven by DC motors with stepless variable drive, making the drilling operation obtain the best performance parameters.

2. 9m high swing lift substructure is used. The drawworks is assembled on the low drill floor and then raised integrally with the substructure floor.

3. 45m high open front mast is assembled on the ground and raised integrally to the upright position.

4. The drilling rig is equipped with 2 F-1300 mud pumps and a complete solids control system that uses four purifying processes.

5. The high installed power is provided, the total power is 750x5=3750kW.

6. Generator set, mud pump set, solids control system and air processing device are installed inside the wind-proof and sand-proof houses. The drill floor and the racking platform are shielded with wind-proof and thermal insulation canvas.
Nominal Drilling Depth by 4 1/2 DP 7000 meters Travelling system 6 x 7
Max.Hook Load 450 MT Mud pump 2 * 1600 HP
Drawworks Rated HP 2000 HP Mast height 45 meters
Drawwork Speed 2 x 2 Rig floor height 9 meters
Drilling line 35 mm  
Rotary Table 37 1/2

 

ZJ70/4500D Drilling Rigs

ZJ70/4500D drilling rig is equipped with a diesel generator set as the power source and uses the direct current electric dirve mode ( by means of AC-SRC-DC) and the "one-to-two" control mode. These two modes feature advanced mechnical properties, convenient and reliable control.

The self lift (slingshot) type substructure is used. The mast and all equipment on the drill floor are assembled in a low position and then raised integrally.

The closed drawworks with stepless variable drive through four gear shifts and the turnover type sinking rotary drive case are used, all connections are made by cardan shafts. The drill floor is smooth and spacious.



Nominal Drilling depth by 4 1/2 inch DP 7000 meters Mast Height 45 meters
Nominal Drilling depth by 5 inch DP 6000 meters Rig Floor height 9 meters
Max. Hook Load 450 MT Prime Mover 4 * 800 KW
Drawworks input Horse Power 2000 HP DC motor 6 * 735 KW
Drawworks speed 4 stepless Rotary Table 37 1/2 inch
Travelling system 6 x 7
Rotary Table speed 2 stepless

 

TRUCK-MOUNTED DRILLING RIG

 

Truck-mounted drilling rig is a kind of self-propelled drilling rig. Self-propelled chassis, II type telescoping mast. with good country cross, easy moving. The power is from the diesel engine on chassis.

Chassis for truck-mounted rig is driven by power through transfer ase from diesel engine. Heavy Duty, wide base axles, low cross-section, high tensile chassis beam, hydraulic steering, dual pipelines braking.

The mast is designed as per API-8C, Double section II type, hydraulic rasing and telescoping mast, dual safety protection, easy operation. FEM analysis system is applied in mast design under 7 conditions.

CAT or Detroit Diesel Engine provides reliable power for rig. Allison transmission provides with excellent performance. Throttle of Engine, gear shfit can be air remote controlled. Gear compound box with compact structure, reliable performance.

Both single drum and Double drum Drawworks are available. Lebus groove to assure wirelines aligning in order and long life. Air thrust disc type clutch is used. Band type brakes for main drum braking, brake rims with forced water circulating cooling. Hydro-brake or air controlled disk brakes are optional for auxiliary brakes.

Centrally controlled electricity, air and hydraulic system provide easy operation and maintenance.

 
Rigs
Drilling Depth (4 1/2 in DP)
Mast Height (meters)
Max. Load (MT)
Carrier
ZJ07
700
12.8
23
6 X 4
ZJ10
1000
32
90
10 X 8
ZJ15
1500
35
120
10 X 8
ZJ20
2000
35
135
12 X 8
ZJ30
3000
36
170
14 X 8

,
 

   

 
 




Contacts Us

Add: Room.1201 ,No.1 Building, Yingkou Roud, Yangpu District   Shanghai, China 200433


Tel:+86-21-5881-1945     


Fax: +86-21-5523-8689


Email:sales@mastpetroequip.com


All Trade marks, trade names & parts numbers are for identification purposes
only Copyright reserved by MPC @2007
沪ICP备07506910号